| PRODUCT DATA SHEET |
| AL-COMPLEX GREASE |
NLGI - 2 |
| A premium quality long life grease for use in all anti-friction and plain bearings subjected to high load and extreme water or even saturated operating conditions. Al Complex NLGI 2 also withstands high temperature environments as encountered in the steel industry. |
|
| COST SAVING BENEFITS |
- Excellent water resistance ensuring maximum grease life and extending lubrication intervals
- Dewatering properties enable application to wet surfaces
- Anti-corrosion agents protects and extends the working life of components
- Extreme Pressure (EP) additives provide protection against premature wear
- Versatile lubricant with a wide temperature range
|
|
| METHOD OF APPLICATION |
Al Complex NLGI 2 can be applied by hand, or by using a standard grease gun, or via a central lubricating system designed for and capable of pumping an NLGI No.2 grease; consult a qualified centralised lubricatioin systems engineer before installation. Can be applied directly onto wet surfaces.
As with all greases used for the first time, check compatibility with the grease applied previously and if necessary purge bearings prior to application. Likewise, as a general rule, take care not to over-lubricate and apply the quantity of grease recommended by the bearing manufacturer. |
|
| TYPICAL PHYSICAL CHARACTERISTICS |
| Appearance |
Smooth adhesive brown grease |
| NLGI Classification |
2 |
| Thickener |
Aluminium complex |
| Base fluid |
Mineral oil |
| Oil Saperation 7days @ 40°C (IP 121) |
1.80 % |
| Dropping point (ASTM D2265) |
230°C min. |
| Water washout (IP 215) |
1.8% |
| Water resistance (DIN 51807) |
Fully resistant |
| Dynamic corrosion resistance (IP 220) |
0:0 |
| Copper corrosion(IP 112) |
Pass |
| Shell Four Ball - Weld load (IP 239) |
315 kgs |
| Timken OK load (IP236) |
20kg. (44lbs) |
| Operating temperature range |
-20°C to + 150°C |
| |
