| PRODUCT DATA SHEET |
| ALUMINUM CONDUCTOR STEEL REINFORCED (ACSR) |
| APPLICATION |
| The product BS - 120 has been developed for use in Aluminum Conductor Steel Reinforced (ACSR) of main power transmission line. The product contains material to modify its fluidity / temperature characteristics. It does not have a very sharply defined melting point. |
|
| SPECIFICATION |
| Test |
Test Method |
Limit |
Typical |
| Appearance |
Blackish |
| Drop Point °C |
ASTM D 566 |
Min 120 |
130 |
| Cone Penetration @ 25°C 1/10mm |
ASTM D 937 |
Min 80 |
88 |
| Flash Point °C (coc) |
ASTM D 92 |
Min 240 |
250 |
| Evaporation Loss @ 105°C, 24 hrs wt % |
ASTM D 972 |
Max 0.3 |
0.01 |
| Sulfur Content @ 120°C, 50 hrs. |
- |
1a |
1a |
| Brittleness 30°C x 1 hr |
ASTM D 746 |
Not Brittle |
Not Brittle |
| Neutralization Number (Titration) |
ASTM D 974 |
Max 0.3 |
0.08 |
| Salt Spray Test 35°C / 150 hrs |
- |
a |
a |
| Drainage Test @ 100°C x 1 hr |
Kep co 25A
121-170 |
No Flow |
Pass |
|
| Note: These are typical figures and variations in these characteristics may occur. |
|
| PACK SIZE |
The above grease is available in 180 kg steel barrels only. |
| |
