| PRODUCT DATA SHEET |
| SPP FOODSHIELD PLUS |
NLGI-2 / 1 / 00 |
| SPP FOODSHIELD PLUS range of greases are designed to cover a wide range of food safe applications, encompassing extremes of temperature, wet and saturated environments, heavily loaded applications and where there is a presence of dust and other contaminants. SPP FOODSHIELD PLUS greases contain extreme pressure / anti-wear additives and PTFE to provide a high degree of load carrying performance. Suitable for all plain and anti-friction bearings as well as sliding surfaces. The SPP FOODSHIELD PLUS range of greases is available in NLGI Nos. 2, 1 and 00. |
|
| COST SAVING BENEFITS |
- Wide performance characteristics enable standardisation to one product for most food safe applications
- Provides long term lubrication at high temperatures, extending lubrication intervals
- Excellent anti-wear performance prolonging component life
- Exceptional degree of water resistance providing lasting lubrication and protecting against corrosion
|
|
| METHOD OF APPLICATION |
- SPP FOODSHIELD PLUS 2 can be applied by hand, or by using a standard grease gun (400gm cartridges are available), or via a central lubricating system capable of pumping an NLGI No. 2 grease
- SPP FOODSHIELD PLUS 1 can be applied by hand, or via a central lubricating system capable of pumping an NLGI No. 1 grease.
- SPP FOODSHIELD PLUS 00 can be applied by hand, but more commonly by the automatic lubrication systems fitted to many types of food processing equipment.
|
| As with all greases used for the first time, check compatibility with the grease applied previously and if necessary purge bearings prior to application. Likewise, as a general rule, take care not to over-lubricate and apply the quantity of grease recommended by the bearing manufacturer. |
|
| TYPICAL PHYSICAL CHARACTERISTICS |
| Appearance |
White tacky grease |
| NLGI Classification |
00, 1, 2 |
| Thickener |
Aluminium complex |
| Drop point (IP 132) |
> 230°C |
| Base oil |
Polyalphaolefin |
| Solid lubricant |
White lubricating solids and PTFE |
| Copper corrosion (IP112) |
Negative |
| Water washout (ASTM D1264) @ 38 °C |
> 1% max. |
| Dynamic corrosion resistance (EMCOR) (IP 220) |
0:0 |
| Shell Four Ball - Weld load(IP239) |
400kg |
| dN factor |
500,000 |
| Operating temperature range |
50°C to +165°C |
|
| NSF Registration Nos. 121507, 121503, 121500 respectively |
| This product contains no genetically modified ingredients and does not contain any nut oil or derivatives |
| |
